30

30" Weld In Short Neck Kit - 14-17 Touring

41mm 10 Degree Trees & Extensions - 00-13 Touring

41mm 10 Degree Trees & Extensions - 00-13 Touring

30" Weld In Short Neck Kit - 09-13 Touring

$1,499.00
American Suspension
Availability: In stock
SKU
S30/09
Loading

1) 30 Weld In Short Neck Kit - 09-13 Touring

The new American Suspension Weld in Short Neck Kit lets you put a 30” wheel on your bagger and keep the long low look.  The American Suspension Kit fits all 2009-2013 Harley Davidson Touring Models.  The complete kit utilizes the same American Suspension geometry you have come to know and trust for precise handling.  The 4-1/4 long neck allows clearance for 4 inches of suspension travel on a 30” wheel while only raising the neck an 1-3/4 up.  The steering geometry works perfect and the true trail is nearly identical to stock.  The Short Neck uses oversize bearings and stem to retain strength. The Short Neck is machined from a solid block of steel using a sophisticated new manufacturing capability.  The one piece billet steel look makes the Short Neck look like it would be right at home on an F-15.  The Short Neck not only looks great, but eliminates all the manufacturing errors inherent in complex weldments.  This is done to insure your project bike will handle great due to perfect steering geometry.

 

 The Short Neck is not just pretty, its built solid from start to finish.  

  

The Slip Fit Short Neck kit Features….

 

1)     Fits 2009-2013 Harley Davidson Touring models

2)     Allows the use of a 30” wheel

3)     Retains zirc grease fitting for easy maintenance

4)     Retains stock steering lock, with closed bottom for maximum security

5)     No need to modify the neck to be used with B-17B inverted performance forks.

6)     Clean billet look, makes your bike “Show perfect” without extensive clean up work

7)     One piece machined instead of complex weldment insure accuracy in design, and precision steering.

8)     Complete Kit includes Weld in Neck, Trees, Lower Bearing, Upper bearing race, Fork leg adapters with air fittings.

9)     Kit uses American Suspension short neck trees, which feature 10 pinch bolts clamping the legs, race style bearing adjustment, tire clearing arch, pressed and clamped solid stem, and machined in place fairing mounts for easy installation.

10) Special fork tube adapters are included to allow solid clamping of the legs, and features use it if you need it air ports for air lowering kits.

11) Patent pending steering stops allow the use of most all nacelles without cutting.

12)  The package also includes hidden bolt handlebar riser mounting kit.

13)  Special packages available to include Air Pistons, Lower Legs and fork covers

14)  EZ weld full beveled edges.  All the edges are beveled where you weld in the neck to allow good penetration and a perfect weld.

More Information
Manufacturer American Suspension
Write Your Own Review
You're reviewing:30" Weld In Short Neck Kit - 09-13 Touring
Your Rating
pc-photo
Need Help?
Speak to our Wheel Specialists: