Black 1 inch 2+2 Bagger Sweeper Handlebars

Description

• 2 in. taller than current +2 in. Sweeper bars
• The throttle grip end is notched and the bar is milled for internal wiring to accommodate the electronic throttle control sensor unit (can also be used on pre-2008 models)
• Cable changes may be required; wire extension for the ETC may or may not be needed
• Dimpled, knurled and available in gloss black finish
• Made in the U.S.A.1″ Diameter Clamping Width: 11 1/2 in.
  Inside Width of Knurling/Outside: 2in/4 1/4 in.
  Drilled for Internal Wiring: Yes
  Dimpled to Prevent Pinching Control Wires: Yes
  Notches for 08-up H-D with Electronic Throttle: Yes